Forklift Attachments

Tipping Skip
Various sizes of Tipping Skips

Designed specifically to save time, money and improve safety. Suitable for most fork lifts. Our skips  handle virtually any bulk material, manufactured in three different thicknesses, there is one to suit every application. All skips have automatic self locking return and come complete with four way entry based frame, safety catch on tip mechanism and safety chain to prevent movement on forks. They are finished with two coats of heavy duty paint for durability.

  • Sizes available: 0.25, 0.50, 0.75, 1.13, 1.30 and 1.75 cu.m.
    		•
  • 2mm, 3mm and 5mm plate
    		•
  • Four way Entry Base
    		•
    0.50 cu.m. Tipping Skip with mesh top 0.50 cu.m. Tipping Skip with steel lid 0.50 cu.m. Tipping Skip in action

    Optional extras include: Automatic Tipping, Castors, Drain Taps, Galvanizing, Mesh Tops & Steel Lids.

    Safety Access Platform  

  • Approx. 2400mm High x 1250mm Wide x 1000mm Long
  • Suits Forks up to 150 x 55mm
  • Unladen Weight: 180 KG
  • Minimum Truck Capacity: 1.5 TONNE
  • Load Centres: 500 MM
  • Max Load: 500 KG
  • Max. Persons: 2
  • Conforms to HSE guidance note PM28 (3rd edition)
  • Safety retaining bar behind forks
  • Work restraint anchorage point
  • Folding fingerguard mesh back panel
  • Self locking automatic return inward opening gate
  • Top safety hand rail, intermediate rail & kick plate all around
  • Non-Slip chequer plate flooring
  • Full operating instructions/caution labels
  • Identification plate
  • Non-integrated working platforms do not come under the Machinery Directive and therefore are
        not CE marked
    		•
    Safety Access Platform Safety Access Platform Safety Access Platform

    Lifting Jib
  • Adapt your fork truck to a crane in
        seconds
  • Supplied with tested 'D' shackle and swivel
        hook
  • Safety retaining bar behind forks
  • Tested and supplied with certificate
  • Suits Forks up to 140 x 60mm
  • FJ1 - 1500KG S.W.L
  • FJ2 - 1500KG S.W.L
  • FJ3 - 1500KG S.W.L - 1000KG S.W.L
  • FJT - 1500KG S.W.L - 500KG S.W.L
    • Lifting Jibs

    Drop Bottom Stillage
  • Automatic Emptying - No manual handle
        to operate
  • Manufactured from 3mm plate
  • Reinforced corners, 50 x 25mm box section
        around edges
  • Fork entry through guides at top of stillage
  • Guides strengthened by 25 x 25mm box section
  • Safety chain to prevent movement on forks
  • Fitted with pallet feet as standard
  • Optional extras include: Castors, Galvanizing &
        Steel Lids.
  • Sizes available: 0.50, 1.00, 1.50 and 2.00 cu.m.
    		•
    1.00 cu.m. Drop Bottom Stillage

    Forklift Tow Ball Attachment
  • Designed to be used for maneuvering Trailers,
        Compressors and Generators around the yard
        using a 50mm tow ball
  • Mounts onto the fork of the truck and secured
        in place behind the heel of the fork with
        a heel pin
  • Finished with two coats of heavy duty paint
        for durability
  • Max Fork Size: 110 x 50mm
  • Max Fork Length: 1070mm
    		•
    Forklift Tow Ball
    Forklift Tow Ball 2 Forklift Tow Ball 3

    Forklift Snow Plough
  • 1260mm Blade Width Standard
  • 1500/1830/2000/2500mm Blade Width also available
  • Manufactured in 5mm Plate
  • 12mm Rubber Wear Strip
  • Max Fork Size: 110 x 50mm - other sizes on request
  • Secures to forks with screw bolts
  • Fixed left hand sweep angle
  • Finished with two coats of heavy duty paint for durability
    		•
    Forklift Snow Plough
    Forklift Snow Plough
    Forklift Snow Plough
     

    Forklift Goods Cage
  • Designed for lifting goods only up to a mezzazine floor and unloading with drop down ramp
  • Manufactured to size, design to suit your requirements
    		•
    Forklift Goods Cage Forklift Goods Cage
    Forklift Goods Cage Forklift Goods Cage
    Forklift Goods Cage Forklift Goods Cage

    [Home] [About Us] [Products] [Promotions]
    Tel: UK (01531) 820545 or 820986   Fax: UK (01531) 822025